Pneumatic conveyors Pom Augustow

Pom Augustow provides two types of pneumatic conveyors: suction – blowing conveyors and just blowing ones.

Pneumatic conveyors power range: from 5,5 to 15 kW.

Efficiency: from 4,5 to 25 t/h.
The standard kit includes 2 m pipe with a coupling and a 90° elbow with a clamp.
You can also purchase a sucking – blowing conveyor with a fan of 3 or 4 sections.

Sucking-blowing pneumatic conveyors

Sucking-blowing pneumatic conveyors are designed to transport grain in horizontal and vertical directions. They can be used for loading-unloading tasks: from trailers, storages or silos into transports or vice-versa. Grain is sucked in by a suction nozzle fixed on a flexible hose, then the grain enters the cyclone and the divider, from which the air flow transports them in a desired destination.

Sucking – blowing pneumatic conveyors T207, T207/1, T207/2, T207/3

T207, T207/1, T207/2, T207/3 standard kit:

• flexible hose with a PVC nozzle and a clamp;
• pipe 2 m and a clamp;
• elbow 90° and a clamp

Sucking – blowing conveyors with 2 sections fan T450 and T450/1

T450 and T450/1 standard kit:

• flexible polyurethane hose with a nozzle and a clamp;
• pipe 2 m and a clamp;
• elbow 90° and a clamp

Sucking – blowing conveyor with a 4 section fan T470

T470 standard kit:

• dust separation cyclone;
• folding hydraulic spill;
• elastic polyurethane hose.

Sucking – blowing conveyors with a 3 sections fan T449, T449/1 and T499/2

T449 and T449/1 conveyors are produced in 2 modifications:

• T449 – attached to a three-point tractor suspension;
• T449/1 – attached with 2 castors.

Blowing pneumatic conveyors

Blowing pneumatic conveyors are designed for grain transportation, when loading the grain into a filling bucket. Injection, divider and pipe system are used to transport grain into a required location via an air flow. Blowing conveyors can be made by removing the suction piece with the hose from a sucking -blowing conveyor and by installing a divider on the dumping bucket.

Blowing conveyors can be equipped with an injector or a divider. Injection, divider and pipe system are used to transport grain to a required location, which increases the conveyors efficiency.

Blowing conveyors with an injector and divider T378/1 and T378/2

T378/1 – with an injector and a pallet divider;
T378/2 – with an injector and a pallet divider.

T378/1, T378/2 standard kit:

• pipe 2 m with a clamp;
• elbow 90° and a clamp

Blowing conveyors T207, T207/1, T207/2, T207/3

T207, T207/1, T207/2, T207/3 standard kit:

• pipe 2 m with a clamp;
• elbow 90° and a clamp